Slitting machine safety hazards and corrective measures

Safety Hazards:

There are some details that need to be paid attention to during production to avoid accidents.

1. Ensure the correct stability of voltage, current, and hydraulic equivalence before starting.

2. Before the machine is ready to run, all personnel must keep a certain safety distance from the machine to ensure personal safety before starting and running.

3. When the slitting machine is running, do not touch the film roll and roller core in operation with your hands, so as not to roll your hands in, and do not touch the blade to avoid cuts.

4. Do not scratch with a knife or hard object, and cut the core of each roller.

5. In case of emergency during operation, the emergency stop button should be pressed immediately, and then the abnormality should be handled.

Improvement measures:

1. Adjust the tension, increase the contact pressure, and limit the amount of air involved.

2. Improve the quality of composite film rolls.

3. Adjust the tool or replace the blade.

4. Reduce the slitting speed, especially when slitting materials that are easy to slide.

5. Slow down or accelerate.