Blog

The secret to extending the life of a barcode ribbon slitting machine: a complete guide to maintenance and maintenance

delish machine05. June, 20250

Routine maintenance points

1. Daily Cleaning:

◦ Use a soft cloth to clean machine surfaces and critical components

◦ Remove ribbon residue around the cutter

◦ Clean the sensor and photoeye

The secret to extending the life of a barcode ribbon slitting machine: a complete guide to maintenance and maintenance

2. Lubrication Management:

◦ Lubricate moving parts according to manufacturer's recommended cycles

◦ Use special lubricating oil to avoid excess

◦ Pay special attention to the lubrication of guide rails and bearings

Regular maintenance schedule

Weekly maintenance

• Check the sharpness of the cutter

• Clean the drivetrain

• Check belt tension

Monthly maintenance

• Inspect electrical connections thoroughly

• Calibrate the tension control system

• Check all fasteners for looseness

Quarterly maintenance

• Replacement of worn parts

• Thoroughly inspect the motor performance

• Clean and inspect the circuit board

The secret to extending the life of a barcode ribbon slitting machine: a complete guide to maintenance and maintenance

Critical component maintenance

1. Cutter system:

◦ Sharpen or change the blade regularly

◦ Keep the knife holder clean

◦ Check blade alignment

2. Transmission system:

◦ Check for belt/chain wear

◦ Make sure that there is no bending of each drive shaft

◦ Keep the gearbox oil level normal

3. Electrical System:

◦ Regularly inspect the terminal blocks

◦ Clean the control panel

◦ Check the sensitivity of each sensor

The secret to extending the life of a barcode ribbon slitting machine: a complete guide to maintenance and maintenance

Operational precautions

• Avoid overloading

• Use ribbons of the appropriate size

• Keep the working environment clean and dry

• Operators need to be professionally trained

Fault warning signal

• Abnormal noise or vibration

• Slitting accuracy decreases

• The running speed of the machine is unstable

• Frequent alarms in the electrical system

Through the strict implementation of the above maintenance measures, the service life of the barcode ribbon slitting machine can be significantly extended, and the efficient and stable production performance can be maintained.

Related Blogs

Related Product