Daily maintenance content of slitting machine

A slitting machine is a machine used to cut materials such as paper, plastic film, metal sheets, etc. In the process of using the slitting machine, in order to ensure the normal operation of the machine and prolong the service life of the machine, it is necessary to carry out daily maintenance of the slitting machine. The following will introduce the daily maintenance of the slitting machine from three aspects: cleaning and cleaning, lubrication maintenance and safety inspection.

First of all, cleaning is an important part of the daily maintenance of the slitting machine. The machine should be cleaned before and after using the slitter. When cleaning, the debris and paper scraps on the machine should be cleaned first, especially around the knife edge and knife holder, so as to avoid the problem of knife edge blockage and unsmooth cutting. Secondly, for the parts coated with grease or powder, you should use a clean soft cloth to wipe to keep the surface of the machine clean. Finally, for some parts that are difficult to clean, you can use tools such as brushes to clean to ensure that the machine is clean and dust-free.

Secondly, lubrication and maintenance is the key to ensure the normal operation of the slitting machine. When using the slitting machine, attention should be paid to lubricating the machine, especially the sealing parts such as machine bearings and gears. Lubricating oil can reduce friction during machine operation, reduce the degree of wear and tear of machine parts, and prolong the service life of the machine. However, when lubricating the machine, pay attention to the amount and frequency of oil, too much or too little will cause adverse effects on the machine. Therefore, the lubricant should be filled at the appropriate time and place according to the specific requirements of the machine.

Finally, safety inspections are necessary to ensure the safety of operators. Before using the slitting machine, the machine should be inspected for safety first, and each part should be checked for looseness, cracks, wear and other problems to ensure the safety of the machine. At the same time, it should be checked clockwise whether the blade is installed correctly, whether it is sharp, and whether the knife holder is stable. In the process of conducting safety inspections, if any abnormal conditions are found, the use should be stopped immediately, and repairs or relevant parts should be replaced.

In addition to routine maintenance, regular maintenance and overhaul should not be neglected. Regular maintenance includes replacing worn parts, cleaning and lubricating the machine, checking whether the electrical system is in good working order, etc. Overhaul is to overhaul the machine, replace aging parts and improve the working performance of the whole machine.

In short, the daily maintenance of the slitting machine is very critical to the normal operation and prolongation of the service life of the machine. Through the implementation of measures such as cleaning and cleaning, lubrication maintenance and safety inspection, the normal operation of the machine and the safety of the operator can be guaranteed. At the same time, regular maintenance and overhaul are also important links to ensure the good operation of the machine. Only by paying full attention to and implementing the daily maintenance of the slitting machine can we ensure the efficient and stable work of the slitting machine and improve the production efficiency and product quality.